How to Fix HP Printer Error Code 59.F0

HP Printer Error Code 59.F0

HP is one of the reliable and famous printer brands available in the market. There is a huge number of people who find the HP printer best for their needs as HP printers are capable of working for both domestic use and office use. All the functions and features of HP printers are recommendable, and one can easily use the HP printer.

But while using the HP printer, one can also come across some problems and errors. And HP Printer Error Code 59.F0 is one of the common errors of the HP printer. This error occurs due to multiple reasons, and in this article, we have mentioned some of them. So, the issue occurs, check out the solution we provide in this article. So, for complete information on HP Printer Error Code 59.F0, read the full article.

Causes of the HP Printer Error Code 59.F0

Causes of the HP Printer Error Code 59.F0
Causes of the HP Printer Error Code 59.F0
  1. Printers’ internal motor issue: Usually, HP Printer Error Code 59.F0 occurs when there is some problem with the internal motor.
  2. Transfer alienation failure: Many times, it occurs when there is some failure of transition alienation. When this happens, ITB is trapped, and therefore cannot rotate. Transfer alienation is a situation where the ITB is stuck and cannot rotate.
  3. SR9 sensor: Another possible cause for this issue is a problem with an SR9 sensor.
  4. SR9 sensor is also known as Sensor k, and it is used for the transfer-roller-disengagement.

All these are the factor responsible for the HP Printer Error Code 59.F0. So, if you are experiencing an issue with your HP printer, then read the given solutions below. These solutions will surely help you to get rid of your issues. So, let’s start.

For HP Printer Support, Dial +1 (917) 338-3683​

Solutions to Fix HP Printer Error Code 59.F0

Method 1: Reset toner and fuser

The first thing a user should try is resetting the toner and the fuser assembly. So, here are the steps for it. Follow the steps correctly, and get rid of your issue.

  1. Initially, reset the HP printer.
  2. Turn off the printer for a couple of minutes.
  3. Now, turn on the printer and wait for a while for the HP color jet printer to revitalize.
  4. In case of any surge protector, then you should remove it.
  5. If the problem still occurs, then it is advisable to replace the motor.
  6. Next, examine the ITB is installed correctly or not.
  7. And then, you need to reconnect the primary transfer disengagement sensor.
  8. After that, you need to run the sensor test in the sensor monitor mode to verify that the primary transfer disengagement is functioning correctly if not replace it.
  9. Last, you are required to perform the alienation drive.

After trying this solution, if the issue continues, then don’t worry and proceed further. The next method also helps you out.

Also See – 49.38.07 Error 4a04

Method 2: Test the ITB

  1. A user needs to remove the ITB completely to test the ITB gear and the flag manually. Thus, follow the given steps to do as not everybody knows the steps.
  2. Initially, you need to carefully rotate the gear and examine for any fluctuation in the flag when you turn the white gear.
  3. On the off chance, you found the flag damaged then it is necessary to replace the ITB.

For HP Printer Support, Dial +1 (917) 338-3683​

But in case both the ITB gear and flag are working properly fine, then you need to check for the Sensor SR9. To do this, you need to follow the given steps to do the Manual Sensor test.

  1. Start with removing the ITB gear, and then locate the Sensor SR9 inside the ITB cavity.
  2. And then, you need to browse the control panel.
  3. Now, you need to press the ‘Home’ button and press the down arrow to point up the diagnostics menu.
  4. Next, select the OK button and click on the Manual Sensor Test.
  5. Click on the OK option.
  6. You need to verify inside the ITB cavity and release the SR9 flag and check the display for the sensor when you press the flag.
  7. You should take care that the sensor should toggle between 0 and 1.
  8. Last, in case a toggle does not occur, then it is high time to get the sensor replaced.

Also Check – HP Printer Error Code 0x83C00009

Conclusion

We hope that these given solutions will be helpful for you and you can easily solve your issue by following them. However, there are times when you are not able to resolve the HP Printer Error Code 59.F0 by yourself as not everybody is perfect in all things. In this situation, you can freely dial the HP printer support number. Here, you will find the experienced and dedicative experts, who will help you out and fix your issue in minimum time.

Liked our Post? Share it!

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email

Leave a Comment

Call Now Button